Natural gas detector 230V AC, semiconductor ORNO

The OR-DC-632 sensor is a modern natural gas detector for indoor use. It is used for continuous monitoring of the presence and detection of natural gas escaping from leaks. The device uses a high quality semiconductor sensor to achieve a high detection rate. When a gas leak reaching the set alarm threshold is detected, the detector will give an audible and light signal. Installation approx. 30 cm from the ceiling.

General information:

Types of detected threats:     natural gas
Nominal voltage:     230V~, 50Hz
Alarm volume (db):     85
Test button:     Yes
Hush button:     No
Type of power supply:     directly to 230V
Failure indication:     Yes
End of life indication:     Yes
Compliance with standards:     EN 50194-1:2009
Life time of the sensor:     5 years
Working temperature:    0°C ~ +40°C
Humidity:   <95%
Sensitivity:   10% LEL* (LEL is the lower explosive limit. It is the lowest gas concentration in the air at which an explosion occurs in contact with an open flame.)
Type of sensor:     semiconductor
Dimensions:     170 x 102 x 51 mm
Net weight:     360 g