Combination Drill & Tap set M3-M10 (7pcs) HSS

They allow for precise drilling even at high revolutions
Drilling and tapping with one tool
Recommended operation of combination drills at idle speed, it is advisable to use coolant when working
Material HSS high speed steel
Type of drill bits combined
Shank 1/4 '(6.35 mm) hexagonal bit for screwdrivers
Point angle 130 °
Cutting direction clockwise
Production method: milling
Finishing: ground
M10 x 1.5 (L= 64 mm)
M8 x 1.25 (L= 64 mm)
M6 x 1.0 (L= 67 mm)
M5 x 0.8 (L= 67 mm)
M4 x 0.7 (L= 70 mm)
M3 x 0.5 (L= 70 mm)