Semi-automatic welding machine DUALMIG 210 S4, 200A, 230V Sherman

Supply voltage [V] AC 230V 50Hz Welding methods MIG, MMA, TIG Lift Production technology IGBT Welding current [A] 200 A Duty cycle [%] 60% Max. current consumption [A] 25 A Max. power consumption [kVA] 8.5 kVA Welding current adjustment Liquid Avg. spool with wire [mm] 100, 200 mm Rev.. wire feed [m / min] 1.5 - 13 m/min Functions 2T / 4T, Inductance adjustment, Welding without gas, 2-roll feeder Dimensions (L x W x H) [mm] 450 x 210 x 305 mm Weight [kg] 11.5 kg

The semi-automatic welding machine DUALMIG 210 S4 is used for manual welding of steel and non-ferrous metals. It enables welding with MIG / MAG, MMA (coated electrode) and Lift TIG methods. It can also be used for braze welding of thin (up to 3mm) galvanized sheets. Due to the change of polarity, the device allows MIG / MAG welding with the use of both standard wires in a protective gas shield and self-shielded flux-cored wires. The welder is used in closed or roofed rooms, not exposed to direct weather conditions. The DUALMIG 210 S4 is compatible with D100 (1kg) and D200 (5kg) wire spools.
The device allows welding in the 2 or 4 stroke mode and has the ability to adjust the inductance used in braze welding and to adjust the penetration during welding.
The device is equipped with a 2-roll wire feeder with smooth regulation of the feeding speed, MIG welding gun, electrode cable and ground cable with a clamp.

Complete set:

• Welding torch TW-15, 3m
• Electrode holder
• Ground cable